CALL US NOW
(888) 971-3031
Cart0Item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.
  • RC5000CRC  Commercial Roof Coating 1 Gallon RC5000CRC  Commercial Roof Coating 1 Gallon
  • RC5000CRC  Commercial Roof Coating 3 Gallon RC5000CRC  Commercial Roof Coating 3 Gallon
  • RC5000CRC  Commercial Roof Coating 5  Gallon RC5000CRC  Commercial Roof Coating 5  Gallon
  • coating standing seam 5g coating standing seam 5g
  • metal roof repair 3g metal roof repair 3g
  • Metal roof coating 1g Metal roof coating 1g
Previous

RC5000EPDM EPDM Roof Coating

Previous

RC5000TPO TPO Coating & Roof Repair

RC5000MR White Reflective Metal Roof Coating

Quick Overview

RC5000MR Metal roofs are beautiful, attractive and relatively functional if they are properly installed. The problem with metal roofing is as the sun hits it it expands and contracts. It also becomes super heated. Coating a metal roof can me a complicated process as may products have poor adhesion to metal. Our metal roof coating solves all those problems. It sticks. It reflects and it waterproofs.Use our system and we'll guarantee it for 10 years -- see details below.Please note product is packaged as RC5000CRC



Product Name Price Qty

Metal roof coating 1g

1 Gallon High Build Modified Acrylic Commercial Roof Coating White (RC5000CRC-1)
$69.99

Metal roof coating 1g

3 Gallon High Build Modified Acrylic Commercial Roof Coating White (RC5000CRC-3)
$164.99

Metal roof coating 1g

5 Gallon High Build Modified Acrylic Commercial Roof Coating White (RC5000CRC-5)
$234.99
  • Buy 10 for $209.99 each and save 11%
  • Buy 20 for $199.99 each and save 15%
  • Buy 100 for $179.99 each and save 24%

Metal roof coating 1g

20 Feet 5" Repair Fabric for use at Seams and Penetrations (RPF-20)
$14.99

Metal roof coating 1g

Roofing Fabric 5" x 275' (RF5275)
$69.99

Metal roof coating 1g

Roofing Fabric 8" x 275' (RF8275)
$89.99

Metal roof coating 1g

Roofing Fabric 40" x 275'
$149.99

Availability: In stock

  • Details

    RC5000MR Metal roofs are beautiful, attractive and relatively functional if they are properly installed. The problem with metal roofing is as the sun hits it it expands and contracts. It also becomes super heated. Coating a metal roof can me a complicated process as may products have poor adhesion to metal. Our metal roof coating solves all those problems. It sticks. It reflects and it waterproofs.Use our system and we'll guarantee it for 10 years -- see details below

    APPLICABLE SUBSTRATES

    RC5000MR is an outstanding choice for coating standing seam roofs and corrugated roof panels. It is important that all fasteners are installed tightly and that any rust is removed prior to application

    Product Features

    • Expands and contracts with the roof
    • High tensile strength
    • One product, one component.
    • Reduces cooling costs
    • Increased density and viscosity

    General System Requirements

    Metal roof systems require a structurally sound substrate that is clean and dry. Surface should be free of any rust, grease, oil or other contaminants. A three layer system shall be applied at all roof penetrations, equipment, drains, waterways, areas known to have ponding water and the perimeter of the roof. A layer of fabric should be embedded in RC4000BC and top coated with two layers of RC5000CRC to create the three layer system. All seams and fasteners MUST be pre-coated.

    Important Note for Warranty and Non Warranty Systems: The number of coats is generally based on a sprayer application. If you are using a roller, we suggest multiple coats to achieve the same amount of material. The product can effectively be rolled on at a rate of 75-100 Sq. Ft. per gallon (1 - 1.5 gallons per square)

    For non-warranty system one coat of RC4000BC at a spread rate of 1 gallon per square (100 Sq. Ft) followed by one coat of RC5000CRC at a spread rate of 1.5 gallons per square will provide considerable protection. For granulated cap sheet it is suggested to embed fabric over the entire roof surface and use two coats of RC5000CRC at a rate of 1 gallon per square (over the base coat). Keep in mind on a metal roof, this product only requires 2.5 gallons per square. With a roller application that is simply one more coat (three coats at 1 square per gallon). With a spray application little additional material is necessary on a metal roof for a warranty.

    Ten Year Limited Warranty Metal Roof Systems

    Qualifying applications can receive a 10 year material only limited warranty. To receive this warranty you must use the systems illustrated below. You must apply for the warranty and submit the required documentation. This may include project photos before, during and after the project. We reserve the right to require inspections.

    Metal Roof Systems

    Regardless of the system being used, all systems require a structurally sound substrate that is clean and dry. Surface should be free of any grease, oil or other contaminants. A three layer system shall be applied at all roof penetrations, equipment, drains, waterways, areas known to have ponding water and the perimeter of the roof. A layer of fabric should be embedded in RC4000BC and top coated with two layers of RC5000CRC to create the three layer system.

    • Pre-coat all seams, screws and fasteners
    • RC4000BC is not necessary for this application.
    • RC5000CRC shall be applied at a rate of 2.5 gallons per square
    • For roller applications 3 coats at 1 square per gallon or two coats at 80 Sq. Ft. per gallon

    Additional Information

    SKU RC5000MR

    Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.