The RC5000 series coating is perfect for coating and repairing commercial and low slope residential EPDM roofs, The RC5000 series coating bonds incredibly well to EPDM, especially when used over RC4000BC. Unlike traditional EPDM coatings, the RC5000 series is a high build, high strength modified acrylic coating with incredible resistance to ponding water.
RC5000 series is is the ideal coating product for repairing, waterproofing and coating old EPDM rubber roofs RC5000 series can be used on flat surfaces, low slope surfaces, vertical surfaces, flashing, and penetrations.
This product is packaged as RC5000CRC
Our EPDM roof coatings requires a structurally sound substrate that is clean and dry. Surface should be free of any grease, oil or other contaminants. A 3-course system shall be applied at all roof penetrations, equipment, drains, waterways, areas known to have ponding water and the perimeter of the roof. This is accomplished by putting a layer of fabric into the RC4000 series base coat and then recoating twice using the RC5000 series.
Important Note for Warranty and Non Warranty Systems: The number of coats is generally based on a sprayer application. If you are using a roller, we suggest multiple coats to achieve the same amount of material. The product can effectively be rolled on at a rate of 75-100 Sq. Ft. per gallon (1 - 1.5 gallons per square)
For non-warranty EPDM roof coating system, simply apply one coat of RC4000BC at a spread rate of 1 gallon per square (100 Sq. Ft). Next apply a top coat of RC5000CRC for EPDM. Use a spread rate of 75 Sq.Ft. per gallon which equates to 1.5 gallons per square
Qualifying applications can receive a 10 year material only limited warranty. To receive this warranty you must use the systems illustrated below. You must apply for the warranty and submit the required documentation. This may include project photos before, during and after the project. We reserve the right to require inspections.