TPO roofing is a type of single ply roof membrane that often fails at the seams, penetrations and in some cases where fasteners are used. TPO is often difficult and expensive to repair. Our RC5000 series roof repair and coating products allows for the easy, seamless, water-tight repair of TPO of membranes.
RC5000 series outstanding for TPO roof repair, waterproofing and coating old TPO single ply roofs. RC5000 series can be used on flat surfaces, low slope surfaces, vertical surfaces, flashing, and penetrations.
This product is packaged as RC5000CRC
Our TPO roof coatings requires a structurally sound substrate that is clean and dry. Surface should be free of any grease, oil or other contaminants. A 3-course system shall be applied at all roof penetrations, equipment, drains, waterways, areas known to have ponding water and the perimeter of the roof. This is accomplished by putting a layer of fabric into the RC4000 series base coat and then recoating twice using the RC5000 series.
Important Note for Warranty and Non Warranty Systems: The number of coats is generally based on a sprayer application. If you are using a roller, we suggest multiple coats to achieve the same amount of material. The product can effectively be rolled on at a rate of 75-100 Sq. Ft. per gallon (1 - 1.5 gallons per square)
For non-warranty TPO roof coating system, simply apply one coat of RC4000BC at a spread rate of 1 gallon per square (100 Sq. Ft). Next apply a top coat of RC5000CRC for TPO. Use a spread rate of 75 Sq.Ft. per gallon which equates to 1.5 gallons per square
Qualifying applications can receive a 10 year material only limited warranty. To receive this warranty you must use the systems illustrated below. You must apply for the warranty and submit the required documentation. This may include project photos before, during and after the project. We reserve the right to require inspections.